For SuperLite 17 (shown) & SuperLite 27 Helmets and KMB-18
& KMB-28 Band Masks "B" side block only
The Hot Water Shroud,
Part #525-100 , can be used whenever diving
operations are conducted on mixed gas, or when diving in cold water. The
shroud helps warm the divers incoming air, thereby lessening diver heat
loss.
This Welding Lens Assembly, PART #
525-403, will fit the SuperLite 17 & 17C, SuperLite 27, the KMB-18,
and the KMB-28. The port retainers are supplied with two plug screws which
are designed to protect the two threaded holes on the port retainer which
are provided for the welding lens assembly.
There are three densities of
lens available:
PART # 525-405___lens,
Light (#5)
PART # 525-406___lens,
Medium (#10)
PART # 525-407___lens,
Dark (#12)
This assembly is designed to provide visiual
protection only!
Exploded
view & parts list
Caution
- Warning
Extreme caution MUST be exercised by all divers, regardless of helmet or
mask used, to avoid the possibility of underwater explosions when
cutting or welding. It cannot be over stressed that any underwater
explosion can result in the injury or death of the diver!
To protect your SuperLite Helmet or Band Mask, the DSI
helmet/mask carrying bag, Part # 500-901 should
be used when transporting or storing your helmet between jobs. The DSI bag
is made from extra heavy duty, black, ripstop nylon. The bottom of the bag
is padded for additional protection. Grommeted drain holes allow the bag to
breath. The bag is also equipped with large carrying straps and side
pockets.
The Oral Nasal masks used in our helmets and
full face masks help lower the carbon dioxide levels while improving speech
communications. Our Silicone Oral Nasal Mask is made of a superior silicone
material which is hypo-allergenic and has a longer work life than standard
latex. The new silicone oral nasal, 510-690, replaces the older 510-540 &
510-547 Latex Oral Nasals.
Part # 510-690
Silicone Standard Oral Nasal for SL-27, SL-17, SL-17C, KMB-18, & KMB-28
Part # 510-569
Latex Small Oral Nasal for SL-27
Part # 510-669
Latex Small Oral Nasal for SL-17, SL-17C,
KMB-18, & KMB-28
The Tool Kit, Part
#525-620, is available for setting up and adjusting the regulator on
your SuperLite-17, SuperLite-27 helmet KMB-18 & KMB-28 Band Mask for maximum
performance.
This adapter, Part # 555-210, attaches to
the L.P. accessories port on the "B" side block. In the event of an
accidental hose break this adapter serves to restrict the flow of gas able
to escape from the port. It should always be used if the hose does not have
built in restriction.